Akiyama Engineering Corporation

In-Tool-Tapping
This is the technology for cost saving with In-Tool-Tapping Unit to do stamping Tapping at one shot.

Drawn Post
(Stainless to 0.5mm)
Drawing stainless material with 0.5mm thickness to form a post with 5mm diameter with 15mm height. This eliminates a post and caulking process.

Drawn Post
(EG t-0.6mm)
Drawing 0.6mm thick EG material to form 10mm diameter with 15mm height post, which eliminate the post and caulking process.

Forging Effect with Stamping
Technology to produce component parts with different thickness in one piece like Forging with conventional stamping parts.

Stamping without Burrs
(No burr on both sides)
Technology to produce stamping parts without burr.

In-Tool-Caulking
This is the process with one shot drawing with one progressing stamping machine to caulk multiple parts (such as levers) by sliding or screwing on Deck Plate or Dive Plate.